Get Technical Advice
Back to Low-temperature resistance modifierLow-temperature resistance modifier
A-940
Anti-cold granule for low-temperature plastic performance
A white or semi-transparent granule documented to support impact, toughness, flexibility and softness in cold-weather plastic applications.
25 kg paper-poly pouch
TDS-derived technical profile
Key values listed for A-940
The following technical values are taken from the current TDS to support grade selection and initial formulation work.
| Property | Listed value | Condition |
|---|---|---|
| Density | 0.98 g/cm³ | — |
| MFI | ≤1 g/10 min | — |
| Molecular weight | >1,000,000 | — |
| Melting point | 160°C | — |
| pH | 6.9 | — |
| Listed dosage | 5% at ≤-10°C; 7-8% at ≤-30°C; 10% at ≤-40°C | Source TDS guide |
What this grade is positioned to support
- Low-temperature impact support
- Cold-weather flexibility and softness
- Temperature-specific dosage screening
How to prepare the first evaluation
- 01
Define the actual minimum service and test temperature.
- 02
Blend A-940 with the selected resin for 5-8 minutes.
- 03
Proceed by extrusion, injection molding or blow molding after uniform mixing.
Technical documentation
Request current TDS Current TDS and application guidance
Source file: a-940-tds.pdf. The temperature/dosage table is a starting guide, not a finished-part guarantee. Test impact on conditioned parts at the actual target temperature.