Get Technical Advice
Back to Plastic matting agentPlastic matting agent
A-5366
A-5366 plastic matting agent for PP / PE / EVA / TPU / ABS / PC / PET / PMMA / PS / POM / PPS / PPO / PA
A-5366 is documented as white granule for PP / PE / EVA / TPU / ABS / PC / PET / PMMA / PS / POM / PPS / PPO / PA. The source TDS lists 4-10% and positions the grade for integrated matte-surface and gloss-reduction trials.
25 kg paper-poly pouch
TDS-derived technical profile
Key values listed for A-5366
The following technical values are taken from the current TDS to support grade selection and initial formulation work.
| Property | Listed value | Condition |
|---|---|---|
| Listed dosage | 4-10% | — |
| Pellet size | 2-3 mm | — |
| Heating loss | <=1% | — |
| Melting point | 150°C | — |
| Heat resistance | 320°C | Source TDS statement |
What this grade is positioned to support
- Integrated matte-surface effect
- Gloss reduction
- Injection, extrusion, blow-molding or casting evaluation
How to prepare the first evaluation
- 01
For powder grades, pre-wet the resin with white mineral oil or diffusion oil when required by the source TDS.
- 02
Add A-5366 and mix for 5-8 minutes.
- 03
Proceed by the selected injection, extrusion, blow-molding or casting route.
Technical documentation
Request current TDS Current TDS and application guidance
Source file: 5366-tds.pdf. Confirm gloss, haze and mechanical-property retention on the actual resin and thickness. The source TDS dosage is a formulation starting range, not a universal finished-part guarantee.