Get Technical Advice
Back to Plastic brightener and flow modifierPlastic brightener and flow modifier
A390-2
A390-2 plastic brightener and flow modifier for PP / PE / PS / PC / ABS / POM / PVC / EVA
A390-2 is documented as white powder for PP / PE / PS / PC / ABS / POM / PVC / EVA. The source TDS lists 0.2-0.8%; 1% or above for flow-focused trials and positions the grade for dispersion, surface gloss and melt-flow adjustment.
25 kg paper-poly pouch or carton
TDS-derived technical profile
Key values listed for A390-2
The following technical values are taken from the current TDS to support grade selection and initial formulation work.
| Property | Listed value | Condition |
|---|---|---|
| Listed dosage | 0.2-0.8%; 1% or above for flow-focused trials | — |
| Density | 0.90125 g/cm3 | 20°C |
| Ash | None stated | — |
| Source model label | A390-2 | — |
What this grade is positioned to support
- Dispersion support
- Surface gloss improvement
- Melt-flow adjustment
How to prepare the first evaluation
- 01
Pre-wet the resin with white mineral oil where needed for uniform powder dispersion.
- 02
Add A390-2 and mix for 8-10 minutes.
- 03
Proceed by extrusion, injection molding or blow molding and compare gloss and flow separately.
Technical documentation
Request current TDS Current TDS and application guidance
Source file: a390-2-tds.pdf. Select dosage by the intended gloss or flow target rather than using one level for both functions. Keep resin, pigment and processing conditions matched during comparison.