Get Technical Advice
Back to Opaque impact modifierOpaque impact modifier
A-8528
Toughening granule for polyolefin bags, films and tubes
A 100%-active toughening granule documented for LLDPE, LDPE, HDPE and PP bags, films and tubes, covering impact, flexibility, low-temperature and weatherability trials.
25 kg paper-poly pouch
TDS-derived technical profile
Key values listed for A-8528
The following technical values are taken from the current TDS to support grade selection and initial formulation work.
| Property | Listed value |
|---|---|
| Effective substance content | 100% |
| Density | 0.9 g/cm³ |
| Melt flow rate | 1-2 g/10 min |
| Hardness | 78 Shore A |
| Brittle temperature | -70°C |
| Elongation at break | 800% |
| Ash | 0% |
What this grade is positioned to support
- Compatibility support across LLDPE / LDPE / HDPE / PP
- Elongation, impact and tear-resistance evaluation
- Controlled small-batch processing trial
How to prepare the first evaluation
- 01
Blend the grade with the selected resin for 5–8 minutes before processing.
- 02
Keep resin grade, ratio, moisture, temperature and specimen geometry consistent between control and modified samples.
- 03
Measure the stabilized specimens after at least 24 hours and calculate uplift against the matched control.
Technical documentation
Request current TDS Current TDS and application guidance
Source file: a-8528-tds.pdf. Use the current TDS values and the listed 2-4% starting range when preparing the first resin trial.