Get Technical Advice
Back to Stiffening and anti-warping agentStiffening and anti-warping agent
A-P34A
Stiffening granule for PP and HDPE dimensional trials
A uniform granule documented for PP and HDPE stiffness, PP anti-bending/anti-warping/anti-shrinkage work and heat-distortion-temperature support.
25 kg paper-poly pouch
TDS-derived technical profile
Key values listed for A-P34A
The following technical values are taken from the current TDS to support grade selection and initial formulation work.
| Property | Listed value |
|---|---|
| Density | 1.23 g/cm³ |
| MFI | ≤1 g/10 min |
| Molecular weight | >1,000,000 |
| Ash | <0.05% |
| Moisture | <0.5% |
| Melting point | 160°C |
| pH | 6.9 |
What this grade is positioned to support
- PP and HDPE stiffness improvement
- PP anti-warping and anti-shrinkage evaluation
- Heat-distortion-temperature support
How to prepare the first evaluation
- 01
Blend A-P34A with PP or HDPE for 5-8 minutes.
- 02
Proceed by extrusion, injection molding or blow molding after uniform mixing.
- 03
Measure stiffness, shrinkage, warpage and impact retention on matched parts.
Technical documentation
Request current TDS Current TDS and application guidance
Source file: a-p34a-tds.pdf. The broad 5-15% range requires a controlled dosage ladder. Material modification must be assessed together with geometry, gate and cooling conditions.