Get Technical Advice
Back to Plastic stiffening agentPlastic stiffening agent
A-P60
A-P60 plastic stiffening agent for PP / PE
A-P60 is documented as uniform white granule for PP / PE. The source TDS lists 6-15% and positions the grade for rigidity, hardness and dimensional-stability modification.
25 kg paper-poly pouch
TDS-derived technical profile
Key values listed for A-P60
The following technical values are taken from the current TDS to support grade selection and initial formulation work.
| Property | Listed value |
|---|---|
| Listed dosage | 6-15% |
| Density | 1.23 g/cm3 |
| MFI | <=1 g/10 min |
| Molecular weight | >1,000,000 |
| Melting point | 160°C |
| Moisture | <0.5% |
What this grade is positioned to support
- PP and PE stiffness improvement
- Hardness support
- Anti-shrinkage and anti-warping evaluation
How to prepare the first evaluation
- 01
Blend A-P60 with the selected resin for 5-8 minutes.
- 02
Proceed by extrusion, injection molding or blow molding after uniform mixing.
- 03
Evaluate the target property on matched control and modified samples.
Technical documentation
Request current TDS Current TDS and application guidance
Source file: a-p60-tds.pdf. Measure impact retention together with stiffness and dimensional change. Part geometry, gate, cooling and orientation remain independent causes of warpage.