Get Technical Advice
Back to Modified EVA materialModified EVA material
A-7008
Modified EVA white granule for extrusion and film routes
A white modified-EVA granule documented for hose, sheet, coil, profile and film production routes as an EVA-replacement candidate requiring application validation.
25 kg paper-poly pouch
TDS-derived technical profile
Key values listed for A-7008
The following technical values are taken from the current TDS to support grade selection and initial formulation work.
| Property | Listed value | Method | Condition |
|---|---|---|---|
| Density | 0.90-0.92 g/cm³ | GB/T 1033 | 23°C |
| Melt flow index | 1.2-2 g/10 min | GB/T 3682 | 190°C / 2.16 kg |
| Hardness | ≥90 Shore A | GB/T 2411 | — |
| Tensile strength at yield | ≥22 MPa | GB/T 1040 | — |
| Elongation at break | ≥660% | GB/T 1040 | — |
| Notched Izod impact strength | No break | GB/T 21189 | 23°C |
What this grade is positioned to support
- Modified EVA raw-material evaluation
- Hose, sheet, coil and profile processing
- Extrusion, blow-molding and cast-film routes
How to prepare the first evaluation
- 01
Treat A-7008 as a raw-material candidate rather than a percentage additive.
- 02
Validate extrusion, blow-molding or cast-film conditions for the actual part.
- 03
Compare physical properties and process cost against the selected virgin EVA grade.
Technical documentation
Request current TDS Current TDS and application guidance
Source file: a-7008-tds.pdf. The source TDS replacement and cost statements are supplier claims and require customer validation. Confirm regulatory, contact and durability requirements for the final application.