Get Technical Advice
Back to Plastic pellet impact modifierPlastic pellet impact modifier
A-6648
A-6648 plastic pellet impact modifier for ABS / PC/ABS / PC/PBT / PC/AS / PC/ASA / PC / PLA / PBT / PET / ABS/PBT
A-6648 is documented as form not stated in source tds for ABS / PC/ABS / PC/PBT / PC/AS / PC/ASA / PC / PLA / PBT / PET / ABS/PBT. The source TDS lists 2-4% and positions the grade for impact, toughness, flexibility and low-temperature performance trials.
25 kg paper-poly pouch
TDS-derived technical profile
Key values listed for A-6648
The following technical values are taken from the current TDS to support grade selection and initial formulation work.
| Property | Listed value |
|---|---|
| Listed dosage | 2-4% |
| Effective substance content | 100% |
| Shore D hardness | 93 |
| Heat-deflection temperature | 123°C |
| Vicat softening temperature | 165°C |
What this grade is positioned to support
- Impact and toughness modification
- Flexibility and crack-resistance support
- Controlled resin-specific evaluation
How to prepare the first evaluation
- 01
Blend A-6648 with the selected resin for 5-8 minutes.
- 02
Proceed by extrusion, injection molding or blow molding after uniform mixing.
- 03
Evaluate the target property on matched control and modified samples.
Technical documentation
Request current TDS Current TDS and application guidance
Source file: a-6648-tds.pdf. Use the same resin grade and processing conditions for control comparisons. Glass fibre, fillers and blend composition can change the result and must be evaluated separately.